RONKONKOMA, NY -- H. A. Guden Co., Inc. stocks continuous steel stop hinges in a variety of sizes, ready for immediate shipment or modification. Stop hinges are used wherever the range of motion of a door or lid must be limited, or stopped at a specific angle. Typical applications are medicine cabinets, electric switch boxes, tool and fishing tackle boxes, etc.

The hinges are stocked in 72 inch lengths in outside and inside configurations.

Outside stop hinges normally operate from the 180 degrees or flat open position, closing to the stop angle of 90 degrees plus or minus 3 degrees. Special stop angles ranging from 105 degrees plus or minus 3 degrees to 60 degrees plus or minus 3 degrees can be furnished on request. The dimensions of Guden outside stop hinges are: 1.06 inch open width, .035 inch thick steel, .086 inch diameter pin and .250 inch knuckle length.

Inside stop hinges normally operate from the zero degrees or closed position, opening to the stop angle of 90 degrees plus or minus 3 degrees. Special stop angles ranging from 57 degrees plus or minus 3 degrees to 100 degrees plus or minus 3 degrees can be furnished on request. The dimensions of Guden inside stop hinges are: 1.50 inch open width, .035 inch thick steel, .091 inch diameter pin and .250 inch knuckle length.

Guden continuous stop hinges can be modified to specific lengths, punched for screw, bolt or rivet installation or manufactured to completely custom specifications with all normal secondaries. Other gauges and widths are available on special order.

Samples, stock lists and complete specifications of Guden continuous steel stop hinges are available.

Guden's extensive product line including continuous, butt and specialty hinges, gas springs, dampers, handles, catches and glides is also available at http://guden.com.

Established in 1920, Guden is an ISO 9000
Registered Company.