About Cam-Stays

Cam-Stay is a manually operated telescopic multi-positional stay designed to support axial loads up to 250 pounds. All Cam-Stays are universal and can be mounted with the holding slots up or down. Mounting of the stays can either be directly to your application through the holes or by mounting brackets.

Operation

Basic: To operate the Basic stay all you need to do is slightly extend the arm from its closed state until it locates into the desired holding position. To close the unit, fully extend the stay before returning it to the closed position. The Basic type is available with 5 or 10 holding positions.

Reversible: To operate the Reversible type stay, extend the arm from its closed position until it locates into the desired holding position. The Reversible version can be closed between any holding positions, it does not need to be fully extended before closing. To close the stay, simply extend it slightly out of its current holding position and close. The Reversible type is available with 6 holding positions.

All Cam-Stay telescopic positioning stays are universal and can be mounted with the holding slots mounted up or down. Mounting of the stays can either be directly to your application through the holes or by mounting brackets.

Specification

Material: Carbon Steel
Finish: Clear passivate
Max. Loading: 250 pounds
Warranty: One Year
Life Expectancy: 20,000 locks
Material Thickness: Arm: .11", Housing: .07"

Easy to install

Cam-Stay is a manually operated telescopic multi-positional stay designed to support up to 250 pounds axial load. All Cam-Stays are universal and can be mounted with the holding slots up or down.

Easy to use

To operate, simply extend the arm until it locks into the desired position. To close, either fully extend the stay before returning it to the closed position (basic models) or extend slightly and close (reversible model).

CAD Models

(Use right click and save as...)

7705-02 (open)
7705-02 (closed)

7706-02 (open)
7706-02 (closed)

7710-02 (open)
7710-02 (closed)

Cam-Stay mounted with brackets

Brackets Available

Straight and 90° brackets are available with M8 threaded pin. Cam-Stay with brackets

Back to Cam-Stays product page.