Slip Joint Hinges Allow Easy Door Removal

RONKONKOMA, NY -- H. A. Guden Co., Inc. offers their line of slip joint hinges for doors that must be removed and replaced without tools. Typical applications are cabinets, control boxes and computer housings where easy, full access to the interior is required.

Guden stock slip joint hinges range in size from 1-1/2" to 3" long and 11/16" to 3" open width. Leaf thicknesses measure from .050" to .093" in steel, stainless and aluminum with stainless pins. Pins are either splined for a tight fit or staked in place.

Off-the-shelf hinges are not hole-punched, so holes can be added as needed, according to the user's specifications. Special finishes can be added. Totally custom sizes and constructions are also available on special order.

H. A. Guden Co., Inc. is registered under ISO-9002 standards for users who require that registration, as well as for the additional quality and service assurance that the ISO registration conveys.

Samples, drawings and complete specifications of Guden slip joint hinges are available.

Guden's extensive product line including continuous, butt and specialty hinges, gas springs, dampers, handles, catches and glides is also available at http://guden.com.

Established in 1920, Guden is an ISO 9000
Registered Company.