Since this is a Continuous Hinge, you may optionally specify a cutoff length for the CAD model. This length will be rounded up to the next multiple of the knuckle length.
More varieties of cutoffs are available -- contact Guden to ask about Custom Continuous Hinges.
Snow Closing Tuesday 1/27/15
At least we're not in the 30 inch range of snow, but there's still significant snow on the ground and it's still coming down which unfortunately will make us stay closed today as it's treacherous for employees to be on the roads. Please continue to use our website for product information, stock pricing, and to place orders with a credit card that will ship as soon as the carriers are back open on Long Island. You can also view our custom hinge site www.Hinges.com to get helpful information, design data and just about anything you ever wanted to know about custom fabricated hinges.
Guden is Currently Closed Due to Winter Storm Juno
To insure the safety of our employees, Guden has closed early in preparation of the the oncoming snow. We expect that tomorrow may bring another closing, but we will confirm in the morning when we wake up to see what the conditions are. Be safe, and of course our two websites www.Guden.com and www.Hinges.com are still open to help with pricing, drawings, product information and custom hinge help and details and explanations.
Hinges Are the New Office Supplies?
As any good Hinge Whisperer knows, you really do never know where you'll see your next hinge sighting. Though a recent office supply run was a bit of a surprise spot for one. It started out with just a glimmer off to the side of my vision as I scoped out the paper products, and then I saw it. The shiny unmistakable shine of zinc or nickel plating. And then as I looked closer, I could see the knuckles. Here in the midst of the office supplies, a custom hinge! It was incorporated into the 3-hole punch. Cut to a 11" length, and fitted with 3 studs, the specially fabricated hinge is used to rotate and press down to punch the holes in the paper. It just goes to show, almost anything that moves or rotates is on some kind of hinge! And what better place to look for custom hinge than Guden. Our one-of-a-kind specialty hinge site www.Hinges.com is a great resource for all things custom hinge. Check it out today!
Thank You for Your Continued Support
Choose from our wide selection of Guden lid supports and table leg braces for all your support type needs. Our light-duty supports have a gentle ride-over locking mechanism that is easily unlocked by a light pressure, while our heavy-duty supports have a positive locking system that needs to be manually disengaged for more security. Most of our supports are supplied in a right or left hand version to make your mounting side choice easy. The majority of lid supports are used in shelving or table type applications, but various other uses abound as well. Here's an interesting and unique use for our supports on a step ladder. Do you have a unique use you'd like to share? We'd love to see it! Check out all our support and brace offerings here: http://www.guden.com/ItemDisplay/Lid-Supports
Your Right to be Free
A hinge that doesn't move isn't usually worth much and most applications require the leaves to rotate around the pin. Most Guden continuous hinges are manufactured in a "run tight" condition so the pins won't fall out easily, are able to be removed, and the hinge leaves rotate with a minimum amount of pressure. Larger gauge hinges will require more pressure to move the leaves. We can also provide continuous hinges in a "run loose" condition as a special run. These hinges will have pins that are far from tight and may require pin retention. So the choice is yours. You can view all our continuous hinge offerings here. And thanks to XKCD.com for a great Hinge cartoon!
And speaking of Free. No one will ever take away our right to be Free. Je Suis Charlie
Two, Two! Two Sightings in One!
An excellent start to the 2015 Hinge Sighting Year! And in this case, a double header of two different styles. Usually when you see a pair of hinges close to each other they're just two of the same hinge, but not this time! Hinge 1 on the left I can see is different from Hinge 2 on the right just by the size of the knuckles. Though unfortunately the rest of the hinge is hidden inside of the door as it's an inside mount. Hinge 2 is surface mounted and I can see all it's glorious hinge splendor complete with a pattern of staggered holes. And it was certainly interesting to see how they only used half the holes for mounting. They didn't require that many holes, but it's most often cheaper to buy a hinge that's already pre-punched with a hole pattern in a large production run instead of adding your own holes to the hinges as a custom run. Luckily with Guden they'll help you compare the price options so you'll be able to make the best choice. For additional help you can always check out our sister hinge site www.Hinges.com for guidance and assistance in choosing the special hinge that's perfect for your application needs.
Happy New Year 2015!
Thank you all for your loyalty and business and our very best wishes to you and yours for a wonderful Happy New Year. Guden will be closed until 1/5/15, so for the rest of 2014, please see our website www.Guden.com for product information, drawings, standard item quotes, and any orders placed will be processed when we return in the new year.
Handles and pulls are here.
The Guden Hinge Whisperer Spots Another Rare One
City traffic is just as good of a place as any to spot a hinge or hardware find, and sometimes it turns out to be a great one. This Hinge Whisperer always keeps his eyes peeled when driving around, but is especially watchful when in dead stop holiday traffic. And lately, traffic jams are the norm around here it seems. So far nothing exciting to report as I scanned all around me. Yawn, yawn, the usual handle or hinges on panels, but then I spied it right in front of me. Literally. The tailgate on the vehicle in front of me drew my attention as I saw the unmistakable curls of knuckles. Hinge Knuckles! The entire tailgate was a hinge! Made from what appeared to be at least 2" thick metal, this grand find had to be the largest and heaviest hinge I've ever seen. And it was even customized a bit to remove the center knuckles for the license plate and a light. A great sighting for sure as it's pretty rare to see a hinge in this type of thickness. So keep your eyes open wherever you are fellow Hinge Whisperers. You just never know where you'll have your next sighting. But of course, keep it safe if you're looking around while driving!
Best Guden Wishes for a Wonderful Holiday Season
From our Guden family to yours, wishing you a very happy and safe Holiday. We will be closed on 12/25 and 12/26 in observance of the Christmas Holiday. but our website www.Guden.com is always available for drawings, descriptions, stock quotes and delivery information and for more details on custom hinges, see our special site www.Hinges.com.
Slow This Year Down a Little!
Guden dampers look just like gas springs except they are filled with oil instead of pressurized gas. They're the perfect product for use to reduce the speed at which a door, cover or lid opens or closes and can even be used to slow the motion of gears, levers or pedals. Available from stock in either a compression or extension dampening, or even dampened in both directions as a custom run, Guden dampers can be used in many motion control applications. They just can't be used to slow down the weeks and months just flying by. Yet. At least not until they're incorporated into a time machine. :)
Is It Really All About That Bass?
I'm not quite sure really, but at Guden, I am sure that it's All About the Capabilities! We have access to some of the best laser cutting tools around and can supply a hinge in a shape or form that goes with just about any beat you can think of. Curves, cuts, even legs, no problem! We'd love to fulfill your Guden custom hinge challenge. And for all the custom hinge help you will ever need, click on over to our custom hinge site: www.Hinges.com
Hingeing Through The Snow
Well it's just December 1st and already most of the country has seen their first significant snow fall. And certainly the people on the other side of New York state from us in the Buffalo area have seen more than their fair share with almost 8 feet of the white stuff already. I'm not sure what kind of plow would even be able to handle that amount, but maybe this plow could help. It certainly only looks like a standard plow, but upon further inspection I can see it's not. It's actually a hinge plow! The center is unmistakably the knuckles of a hinge and the sides of the plow are actually formed leaves. The hinge allows for the plow sides to rotate around the pin and angle into different positions. Unique for sure, and certainly will rank pretty high up in the running for my hinge sighting of the month.
Guden is thankful for so much this year, mostly YOU, our customers!
Have a SAFE and HAPPY holiday!
(Guden office is closed Thursday and Friday)
Hinges With Benefits
One of the most important things about picking the right hinge for the job is strength. What weight do you expect it to hold and what stress will it be under in the application. And in many cases, you'll need to balance both.
Take for instance this very light plexiglass door covering the spout for a water dispensing unit. It probably doesn't weight more than half a pound so a light duty .035 thick stainless hinge easily does the trick, but one thing this designer didn't take into consideration was the possibility that people opening the door would also lean on it. It's pretty apparent that the top of the hinge has already bent from the extra stress. It could have possibly been helped by a thicker hinge, and also having a connection point closer to the top of the hinge.
Just one of the things to consider when selecting a hinge.
In Honor of Veterans Day
Everyone at Guden is thankful for the time, energy and sacrifices that have been made by all our veterans to protect us, our country and our freedom, including our owner and president Al Guden.
The Not So Straight and Narrow
So you think that hinge leaves can just be flat or bent?
Stop, In the Name Of... Hinge?
I always look at hinges no matter where I am and a doctor's office is no exception. I now actually kind of enjoy when they leave you in the room for what sometimes feels like hours. What used to be time to just sit there patiently waiting has now turned into a Hinge Whisperer's field day for hinge and hardware sightings.
Guden Supports STEM Education
That's our robotics team, "Sachem Aftershock" #263 just as they were
putting the final touches on the 2013 robot. They went on to win many
matches in competition,
but were knocked out in the quarter finals
(a picture of the arena is below). It was a great season and we all
had a blast. Four kids in this photo are now at engineering universities!
The Not So Terrible Twos
We've all heard the sayings but are they really true. Is love really a two way street? Does it really take two to tango? Two wrongs can't make a right? Are there just two sides to every coin? In two shakes of a lamb's tail? Is a bird in the hand truly worth more than two in the bush? But how about the most burdening question of all? Are two hinges better than one?
Guden is The Custom Hinge Source
The Guden custom hinge site is all about custom hinge!